Import/Export Danych do R

Table of Contents

Import/Export Danych do R

This is a guide to importing and exporting data to and from R.

Niniejszy podręcznik przeznaczony jest dla R w wersji (3.3.0).

Copyright © 2000–2014 R Core Team

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the R Core Team.


Acknowledgements

The relational databases part of this manual is based in part on an earlier manual by Douglas Bates and Saikat DebRoy. The principal author of this manual was Brian Ripley.

Many volunteers have contributed to the packages used here. The principal authors of the packages mentioned are

DBIDavid A. James
dataframes2xlsGuido van Steen
foreignThomas Lumley, Saikat DebRoy, Douglas Bates, Duncan Murdoch oraz Roger Bivand
gdataGregory R. Warnes
hdf5Marcus Daniels
ncdf, ncdf4David Pierce
rJavaSimon Urbanek
RJDBCSimon Urbanek
RMySQLDavid James oraz Saikat DebRoy
RNetCDFPavel Michna
RODBCMichael Lapsley oraz Brian Ripley
ROracleDavid A, James
RPostgreSQLSameer Kumar Prayaga oraz Tomoaki Nishiyama
RSPerlDuncan Temple Lang
RSPythonDuncan Temple Lang
RSQLiteDavid A, James
SJavaJohn Chambers oraz Duncan Temple Lang
WriteXLSMarc Schwartz
XLConnectMirai Solutions GmbH
xlsReadWriteHans-Peter Suter
XMLDuncan Temple Lang

Brian Ripley is the author of the support for connections.


1 Introduction

Reading data into a statistical system for analysis and exporting the results to some other system for report writing can be frustrating tasks that can take far more time than the statistical analysis itself, even though most readers will find the latter far more appealing.

This manual describes the import and export facilities available either in R itself or via packages which are available from CRAN or elsewhere.

Unless otherwise stated, everything described in this manual is (at least in principle) available on all platforms running R.

In general, statistical systems like R are not particularly well suited to manipulations of large-scale data. Some other systems are better than R at this, and part of the thrust of this manual is to suggest that rather than duplicating functionality in R we can make another system do the work! (For example Therneau & Grambsch (2000) commented that they preferred to do data manipulation in SAS and then use package survival in S for the analysis.) Database manipulation systems are often very suitable for manipulating and extracting data: several packages to interact with DBMSs are discussed here.

There are packages to allow functionality developed in languages such as Java, perl and python to be directly integrated with R code, making the use of facilities in these languages even more appropriate. (See the rJava package from CRAN and the SJava, RSPerl and RSPython packages from the Omegahat project, http://www.omegahat.org.)

It is also worth remembering that R like S comes from the Unix tradition of small re-usable tools, and it can be rewarding to use tools such as awk and perl to manipulate data before import or after export. The case study in Becker, Chambers & Wilks (1988, Chapter 9) is an example of this, where Unix tools were used to check and manipulate the data before input to S. The traditional Unix tools are now much more widely available, including for Windows.


1.1 Imports

The easiest form of data to import into R is a simple text file, and this will often be acceptable for problems of small or medium scale. The primary function to import from a text file is scan, and this underlies most of the more convenient functions discussed in Spreadsheet-like data.

However, all statistical consultants are familiar with being presented by a client with a memory stick (formerly, a floppy disc or CD-R) of data in some proprietary binary format, for example ‘an Excel spreadsheet’ or ‘an SPSS file’. Often the simplest thing to do is to use the originating application to export the data as a text file (and statistical consultants will have copies of the most common applications on their computers for that purpose). However, this is not always possible, and Importing from other statistical systems discusses what facilities are available to access such files directly from R. For Excel spreadsheets, the available methods are summarized in Reading Excel spreadsheets. For ODS spreadsheets from Open Office, see the Omegahat package1 ROpenOffice.

In a few cases, data have been stored in a binary form for compactness and speed of access. One application of this that we have seen several times is imaging data, which is normally stored as a stream of bytes as represented in memory, possibly preceded by a header. Such data formats are discussed in Binary files and Binary connections.

For much larger databases it is common to handle the data using a database management system (DBMS). There is once again the option of using the DBMS to extract a plain file, but for many such DBMSs the extraction operation can be done directly from an R package: See Relational databases. Importing data via network connections is discussed in Network interfaces.


1.1.1 Encodings

Unless the file to be imported from is entirely in ASCII, it is usually necessary to know how it was encoded. For text files, a good way to find out something about its structure is the file command-line tool (for Windows, included in Rtools). This reports something like

text.Rd: UTF-8 Unicode English text
text2.dat: ISO-8859 English text
text3.dat: Little-endian UTF-16 Unicode English character data,
   with CRLF line terminators
intro.dat: UTF-8 Unicode text
intro.dat: UTF-8 Unicode (with BOM) text

Modern Unix-alike systems, including OS X, are likely to produce UTF-8 files. Windows may produce what it calls ‘Unicode’ files (UCS-2LE or just possibly UTF-16LE2). Otherwise most files will be in a 8-bit encoding unless from a Chinese/Japanese/Korean locale (which have a wide range of encodings in common use). It is not possible to automatically detect with certainty which 8-bit encoding (although guesses may be possible and file may guess as it did in the example above), so you may simply have to ask the originator for some clues (e.g. ‘Russian on Windows’).

‘BOMs’ (Byte Order Marks, https://en.wikipedia.org/wiki/Byte_order_mark) cause problems for Unicode files. In the Unix world BOMs are rarely used, whereas in the Windows world they almost always are for UCS-2/UTF-16 files, and often are for UTF-8 files. The file utility will not even recognize UCS-2 files without a BOM, but many other utilities will refuse to read files with a BOM and the IANA standards for UTF-16LE and UTF-16BE prohibit it. We have too often been reduced to looking at the file with the command-line utility od or a hex editor to work out its encoding.

Note that utf8 is not a valid encoding name (UTF-8 is), and macintosh is the most portable name for what is sometimes called ‘Mac Roman’ encoding.


1.2 Export to text files

Exporting results from R is usually a less contentious task, but there are still a number of pitfalls. There will be a target application in mind, and normally a text file will be the most convenient interchange vehicle. (If a binary file is required, see Binary files.)

Function cat underlies the functions for exporting data. It takes a file argument, and the append argument allows a text file to be written via successive calls to cat. Better, especially if this is to be done many times, is to open a file connection for writing or appending, and cat to that connection, then close it.

The most common task is to write a matrix or data frame to file as a rectangular grid of numbers, possibly with row and column labels. This can be done by the functions write.table and write. Function write just writes out a matrix or vector in a specified number of columns (and transposes a matrix). Function write.table is more convenient, and writes out a data frame (or an object that can be coerced to a data frame) with row and column labels.

There are a number of issues that need to be considered in writing out a data frame to a text file.

  1. Precision

    Most of the conversions of real/complex numbers done by these functions is to full precision, but those by write are governed by the current setting of options(digits). For more control, use format on a data frame, possibly column-by-column.

  2. Header line

    R prefers the header line to have no entry for the row names, so the file looks like

                    dist    climb   time
    Greenmantle     2.5     650     16.083
       ...
    

    Some other systems require a (possibly empty) entry for the row names, which is what write.table will provide if argument col.names = NA is specified. Excel is one such system.

  3. Separator

    A common field separator to use in the file is a comma, as that is unlikely to appear in any of the fields in English-speaking countries. Such files are known as CSV (comma separated values) files, and wrapper function write.csv provides appropriate defaults. In some locales the comma is used as the decimal point (set this in write.table by dec = ",") and there CSV files use the semicolon as the field separator: use write.csv2 for appropriate defaults. There is an IETF standard for CSV files (which mandates commas and CRLF line endings, for which use eol = "\r\n"), RFC4180 (see https://tools.ietf.org/html/rfc4180), but what is more important in practice is that the file is readable by the application it is targeted at.

    Using a semicolon or tab (sep = "\t") are probably the safest options.

  4. Missing values

    By default missing values are output as NA, but this may be changed by argument na. Note that NaNs are treated as NA by write.table, but not by cat nor write.

  5. Quoting strings

    By default strings are quoted (including the row and column names). Argument quote controls if character and factor variables are quoted: some programs, for example Mondrian, do not accept quoted strings (which are the default).

    Some care is needed if the strings contain embedded quotes. Three useful forms are

    > df <- data.frame(a = I("a \" quote"))
    > write.table(df)
    "a"
    "1" "a \" quote"
    > write.table(df, qmethod = "double")
    "a"
    "1" "a "" quote"
    > write.table(df, quote = FALSE, sep = ",")
    a
    1,a " quote
    

    The second is the form of escape commonly used by spreadsheets.

  6. Encodings

    Text files do not contain metadata on their encodings, so for non-ASCII data the file needs to be targetted to the application intended to read it. All of these functions can write to a connection which allows an encoding to be specified for the file, and write.table has a fileEncoding argument to make this easier.

    The hard part is to know what file encoding to use. For use on Windows, it is best to use what Windows calls ‘Unicode’3, that is "UTF-16LE". Using UTF-8 is a good way to make portable files that will not easily be confused with any other encoding, but even OS X applications (where UTF-8 is the system encoding) may not recognize them, and Windows applications are most unlikely to. Apparently Excel:mac 2004/8 expects .csv files in "macroman" encoding (the encoding used in much earlier versions of Mac OS).

Function write.matrix in package MASS provides a specialized interface for writing matrices, with the option of writing them in blocks and thereby reducing memory usage.

It is possible to use sink to divert the standard R output to a file, and thereby capture the output of (possibly implicit) print statements. This is not usually the most efficient route, and the options(width) setting may need to be increased.

Function write.foreign in package foreign uses write.table to produce a text file and also writes a code file that will read this text file into another statistical package. There is currently support for export to SAS, SPSS and Stata.


1.3 XML

When reading data from text files, it is the responsibility of the user to know and to specify the conventions used to create that file, e.g. the comment character, whether a header line is present, the value separator, the representation for missing values (and so on) described in Export to text files. A markup language which can be used to describe not only content but also the structure of the content can make a file self-describing, so that one need not provide these details to the software reading the data.

The eXtensible Markup Language – more commonly known simply as XML – can be used to provide such structure, not only for standard datasets but also more complex data structures. XML is becoming extremely popular and is emerging as a standard for general data markup and exchange. It is being used by different communities to describe geographical data such as maps, graphical displays, mathematics and so on.

XML provides a way to specify the file’s encoding, e.g.

<?xml version="1.0" encoding="UTF-8"?>

although it does not require it.

The XML package provides general facilities for reading and writing XML documents within R. A description of the facilities of the XML package is outside the scope of this document: see the package’s Web page at http://www.omegahat.org/RSXML for details and examples. Package StatDataML on CRAN is one example building on XML.

NB: XML is available as a binary package for Windows, normally from the ‘CRAN extras’ repository (which is selected by default on Windows).


2 Spreadsheet-like data

In Export to text files we saw a number of variations on the format of a spreadsheet-like text file, in which the data are presented in a rectangular grid, possibly with row and column labels. In this section we consider importing such files into R.


2.1 Variations on read.table

The function read.table is the most convenient way to read in a rectangular grid of data. Because of the many possibilities, there are several other functions that call read.table but change a group of default arguments.

Beware that read.table is an inefficient way to read in very large numerical matrices: see scan below.

Some of the issues to consider are:

  1. Encoding

    If the file contains non-ASCII character fields, ensure that it is read in the correct encoding. This is mainly an issue for reading Latin-1 files in a UTF-8 locale, which can be done by something like

    read.table("file.dat", fileEncoding="latin1")
    

    Note that this will work in any locale which can represent Latin-1 strings, but not many Greek/Russian/Chinese/Japanese … locales.

  2. Header line

    We recommend that you specify the header argument explicitly, Conventionally the header line has entries only for the columns and not for the row labels, so is one field shorter than the remaining lines. (If R sees this, it sets header = TRUE.) If presented with a file that has a (possibly empty) header field for the row labels, read it in by something like

    read.table("file.dat", header = TRUE, row.names = 1)
    

    Column names can be given explicitly via the col.names; explicit names override the header line (if present).

  3. Separator

    Normally looking at the file will determine the field separator to be used, but with white-space separated files there may be a choice between the default sep = "" which uses any white space (spaces, tabs or newlines) as a separator, sep = " " and sep = "\t". Note that the choice of separator affects the input of quoted strings.

    If you have a tab-delimited file containing empty fields be sure to use sep = "\t".

  4. Quoting

    By default character strings can be quoted by either ‘"’ or ‘'’, and in each case all the characters up to a matching quote are taken as part of the character string. The set of valid quoting characters (which might be none) is controlled by the quote argument. For sep = "\n" the default is changed to quote = "".

    If no separator character is specified, quotes can be escaped within quoted strings by immediately preceding them by ‘\’, C-style.

    If a separator character is specified, quotes can be escaped within quoted strings by doubling them as is conventional in spreadsheets. For example

    'One string isn''t two',"one more"
    

    can be read by

    read.table("testfile", sep = ",")
    

    This does not work with the default separator.

  5. Missing values

    By default the file is assumed to contain the character string NA to represent missing values, but this can be changed by the argument na.strings, which is a vector of one or more character representations of missing values.

    Empty fields in numeric columns are also regarded as missing values.

    In numeric columns, the values NaN, Inf and -Inf are accepted.

  6. Unfilled lines

    It is quite common for a file exported from a spreadsheet to have all trailing empty fields (and their separators) omitted. To read such files set fill = TRUE.

  7. White space in character fields

    If a separator is specified, leading and trailing white space in character fields is regarded as part of the field. To strip the space, use argument strip.white = TRUE.

  8. Blank lines

    By default, read.table ignores empty lines. This can be changed by setting blank.lines.skip = FALSE, which will only be useful in conjunction with fill = TRUE, perhaps to use blank rows to indicate missing cases in a regular layout.

  9. Classes for the variables

    Unless you take any special action, read.table reads all the columns as character vectors and then tries to select a suitable class for each variable in the data frame. It tries in turn logical, integer, numeric and complex, moving on if any entry is not missing and cannot be converted.4 If all of these fail, the variable is converted to a factor.

    Arguments colClasses and as.is provide greater control. Specifying as.is = TRUE suppresses conversion of character vectors to factors (only). Using colClasses allows the desired class to be set for each column in the input: it will be faster and use less memory.

    Note that colClasses and as.is are specified per column, not per variable, and so include the column of row names (if any).

  10. Comments

    By default, read.table uses ‘#’ as a comment character, and if this is encountered (except in quoted strings) the rest of the line is ignored. Lines containing only white space and a comment are treated as blank lines.

    If it is known that there will be no comments in the data file, it is safer (and may be faster) to use comment.char = "".

  11. Escapes

    Many OSes have conventions for using backslash as an escape character in text files, but Windows does not (and uses backslash in path names). It is optional in R whether such conventions are applied to data files.

    Both read.table and scan have a logical argument allowEscapes. This is false by default, and backslashes are then only interpreted as (under circumstances described above) escaping quotes. If this set to be true, C-style escapes are interpreted, namely the control characters \a, \b, \f, \n, \r, \t, \v and octal and hexadecimal representations like \040 and \0x2A. Any other escaped character is treated as itself, including backslash. Note that Unicode escapes such as \uxxxx are never interpreted.

  12. Encoding

    This can be specified by the fileEncoding argument, for example

    fileEncoding = "UCS-2LE"    # Windows 'Unicode' files
    fileEncoding = "UTF-8"
    

    If you know (correctly) the file’s encoding this will almost always work. However, we know of one exception, UTF-8 files with a BOM. Some people claim that UTF-8 files should never have a BOM, but some software (apparently including Excel:mac) uses them, and many Unix-alike OSes do not accept them. So faced with a file which file reports as

    intro.dat: UTF-8 Unicode (with BOM) text
    

    it can be read on Windows by

    read.table("intro.dat", fileEncoding = "UTF-8")
    

    but on a Unix-alike might need

    read.table("intro.dat", fileEncoding = "UTF-8-BOM")
    

    (This would most likely work without specifying an encoding in a UTF-8 locale.)

    Another problem with this (real-life) example is that whereas file-5.03 reported the BOM, file-4.17 found on OS 10.5 (Leopard) did not.

Convenience functions read.csv and read.delim provide arguments to read.table appropriate for CSV and tab-delimited files exported from spreadsheets in English-speaking locales. The variations read.csv2 and read.delim2 are appropriate for use in those locales where the comma is used for the decimal point and (for read.csv2) for spreadsheets which use semicolons to separate fields.

If the options to read.table are specified incorrectly, the error message will usually be of the form

Error in scan(file = file, what = what, sep = sep, : 
        line 1 did not have 5 elements

lub

Error in read.table("files.dat", header = TRUE) : 
        more columns than column names

This may give enough information to find the problem, but the auxiliary function count.fields can be useful to investigate further.

Efficiency can be important when reading large data grids. It will help to specify comment.char = "", colClasses as one of the atomic vector types (logical, integer, numeric, complex, character or perhaps raw) for each column, and to give nrows, the number of rows to be read (and a mild over-estimate is better than not specifying this at all). See the examples in later sections.


2.2 Fixed-width-format files

Sometimes data files have no field delimiters but have fields in pre-specified columns. This was very common in the days of punched cards, and is still sometimes used to save file space.

Function read.fwf provides a simple way to read such files, specifying a vector of field widths. The function reads the file into memory as whole lines, splits the resulting character strings, writes out a temporary tab-separated file and then calls read.table. This is adequate for small files, but for anything more complicated we recommend using the facilities of a language like perl to pre-process the file.

Function read.fortran is a similar function for fixed-format files, using Fortran-style column specifications.


2.3 Data Interchange Format (DIF)

An old format sometimes used for spreadsheet-like data is DIF, or Data Interchange format.

Function read.DIF provides a simple way to read such files. It takes arguments similar to read.table for assigning types to each of the columns.

On Windows, spreadsheet programs often store spreadsheet data copied to the clipboard in this format; read.DIF("clipboard") can read it from there directly. It is slightly more robust than read.table("clipboard") in handling spreadsheets with empty cells.


2.4 Using scan directly

Both read.table and read.fwf use scan to read the file, and then process the results of scan. They are very convenient, but sometimes it is better to use scan directly.

Function scan has many arguments, most of which we have already covered under read.table. The most crucial argument is what, which specifies a list of modes of variables to be read from the file. If the list is named, the names are used for the components of the returned list. Modes can be numeric, character or complex, and are usually specified by an example, e.g. 0, "" or 0i. For example

cat("2 3 5 7", "11 13 17 19", file="ex.dat", sep="\n")
scan(file="ex.dat", what=list(x=0, y="", z=0), flush=TRUE)

returns a list with three components and discards the fourth column in the file.

There is a function readLines which will be more convenient if all you want is to read whole lines into R for further processing.

One common use of scan is to read in a large matrix. Suppose file matrix.dat just contains the numbers for a 200 x 2000 matrix. Then we can use

A <- matrix(scan("matrix.dat", n = 200*2000), 200, 2000, byrow = TRUE)

On one test this took 1 second (under Linux, 3 seconds under Windows on the same machine) whereas

A <- as.matrix(read.table("matrix.dat"))

took 10 seconds (and more memory), and

A <- as.matrix(read.table("matrix.dat", header = FALSE, nrows = 200,
                          comment.char = "", colClasses = "numeric"))

took 7 seconds. The difference is almost entirely due to the overhead of reading 2000 separate short columns: were they of length 2000, scan took 9 seconds whereas read.table took 18 if used efficiently (in particular, specifying colClasses) and 125 if used naively.

Note that timings can depend on the type read and the data. Consider reading a million distinct integers:

writeLines(as.character((1+1e6):2e6), "ints.dat")
xi <- scan("ints.dat", what=integer(0), n=1e6)   # 0.77s
xn <- scan("ints.dat", what=numeric(0), n=1e6)   # 0.93s
xc <- scan("ints.dat", what=character(0), n=1e6) # 0.85s
xf <- as.factor(xc)                              # 2.2s
DF <- read.table("ints.dat")                     # 4.5s

and a million examples of a small set of codes:

code <- c("LMH", "SJC", "CHCH", "SPC", "SOM")
writeLines(sample(code, 1e6, replace=TRUE), "code.dat")
y <- scan("code.dat", what=character(0), n=1e6)  # 0.44s
yf <- as.factor(y)                               # 0.21s
DF <- read.table("code.dat")                     # 4.9s
DF <- read.table("code.dat", nrows=1e6)          # 3.6s

Note that these timings depend heavily on the operating system (the basic reads in Windows take at least as twice as long as these Linux times) and on the precise state of the garbage collector.


2.5 Re-shaping data

Sometimes spreadsheet data is in a compact format that gives the covariates for each subject followed by all the observations on that subject. R’s modelling functions need observations in a single column. Consider the following sample of data from repeated MRI brain measurements

 Status   Age    V1     V2     V3    V4
      P 23646 45190  50333  55166 56271
     CC 26174 35535  38227  37911 41184
     CC 27723 25691  25712  26144 26398
     CC 27193 30949  29693  29754 30772
     CC 24370 50542  51966  54341 54273
     CC 28359 58591  58803  59435 61292
     CC 25136 45801  45389  47197 47126

There are two covariates and up to four measurements on each subject. The data were exported from Excel as a file mr.csv.

We can use stack to help manipulate these data to give a single response.

zz <- read.csv("mr.csv", strip.white = TRUE)
zzz <- cbind(zz[gl(nrow(zz), 1, 4*nrow(zz)), 1:2], stack(zz[, 3:6]))

with result

      Status   Age values ind
X1         P 23646  45190  V1
X2        CC 26174  35535  V1
X3        CC 27723  25691  V1
X4        CC 27193  30949  V1
X5        CC 24370  50542  V1
X6        CC 28359  58591  V1
X7        CC 25136  45801  V1
X11        P 23646  50333  V2
...

Function unstack goes in the opposite direction, and may be useful for exporting data.

Another way to do this is to use the function reshape, by

> reshape(zz, idvar="id",timevar="var",
  varying=list(c("V1","V2","V3","V4")),direction="long")
    Status   Age var    V1 id
1.1      P 23646   1 45190  1
2.1     CC 26174   1 35535  2
3.1     CC 27723   1 25691  3
4.1     CC 27193   1 30949  4
5.1     CC 24370   1 50542  5
6.1     CC 28359   1 58591  6
7.1     CC 25136   1 45801  7
1.2      P 23646   2 50333  1
2.2     CC 26174   2 38227  2
...

The reshape function has a more complicated syntax than stack but can be used for data where the ‘long’ form has more than the one column in this example. With direction="wide", reshape can also perform the opposite transformation.

Some people prefer the tools in packages reshape, reshape2 and plyr.


2.6 Flat contingency tables

Displaying higher-dimensional contingency tables in array form typically is rather inconvenient. In categorical data analysis, such information is often represented in the form of bordered two-dimensional arrays with leading rows and columns specifying the combination of factor levels corresponding to the cell counts. These rows and columns are typically “ragged” in the sense that labels are only displayed when they change, with the obvious convention that rows are read from top to bottom and columns are read from left to right. In R, such “flat” contingency tables can be created using ftable, which creates objects of class "ftable" with an appropriate print method.

As a simple example, consider the R standard data set UCBAdmissions which is a 3-dimensional contingency table resulting from classifying applicants to graduate school at UC Berkeley for the six largest departments in 1973 classified by admission and sex.

> data(UCBAdmissions)
> ftable(UCBAdmissions)
                Dept   A   B   C   D   E   F
Admit    Gender                             
Admitted Male        512 353 120 138  53  22
         Female       89  17 202 131  94  24
Rejected Male        313 207 205 279 138 351
         Female       19   8 391 244 299 317

The printed representation is clearly more useful than displaying the data as a 3-dimensional array.

There is also a function read.ftable for reading in flat-like contingency tables from files. This has additional arguments for dealing with variants on how exactly the information on row and column variables names and levels is represented. The help page for read.ftable has some useful examples. The flat tables can be converted to standard contingency tables in array form using as.table.

Note that flat tables are characterized by their “ragged” display of row (and maybe also column) labels. If the full grid of levels of the row variables is given, one should instead use read.table to read in the data, and create the contingency table from this using xtabs.


3 Importing from other statistical systems

In this chapter we consider the problem of reading a binary data file written by another statistical system. This is often best avoided, but may be unavoidable if the originating system is not available.

In all cases the facilities described were written for data files from specific versions of the other system (often in the early 2000s), and have not necessarily been updated for the most recent versions of the other system.


3.1 EpiInfo, Minitab, S-PLUS, SAS, SPSS, Stata, Systat

The recommended package foreign provides import facilities for files produced by these statistical systems, and for export to Stata. In some cases these functions may require substantially less memory than read.table would. write.foreign (See Export to text files) provides an export mechanism with support currently for SAS, SPSS and Stata.

EpiInfo versions 5 and 6 stored data in a self-describing fixed-width text format. read.epiinfo will read these .REC files into an R data frame. EpiData also produces data in this format.

Function read.mtp imports a ‘Minitab Portable Worksheet’. This returns the components of the worksheet as an R list.

Function read.xport reads a file in SAS Transport (XPORT) format and return a list of data frames. If SAS is available on your system, function read.ssd can be used to create and run a SAS script that saves a SAS permanent dataset (.ssd or .sas7bdat) in Transport format. It then calls read.xport to read the resulting file. (Package Hmisc has a similar function sas.get, also running SAS.) For those without access to SAS but running on Windows, the SAS System Viewer (a zero-cost download) can be used to open SAS datasets and export them to e.g. .csv format.

Function read.S which can read binary objects produced by S-PLUS 3.x, 4.x or 2000 on (32-bit) Unix or Windows (and can read them on a different OS). This is able to read many but not all S objects: in particular it can read vectors, matrices and data frames and lists containing those.

Function data.restore reads S-PLUS data dumps (created by data.dump) with the same restrictions (except that dumps from the Alpha platform can also be read). It should be possible to read data dumps from S-PLUS 5.x and later written with data.dump(oldStyle=T).

If you have access to S-PLUS, it is usually more reliable to dump the object(s) in S-PLUS and source the dump file in R. For S-PLUS 5.x and later you may need to use dump(..., oldStyle=T), and to read in very large objects it may be preferable to use the dump file as a batch script rather than use the source function.

Function read.spss can read files created by the ‘save’ and ‘export’ commands in SPSS. It returns a list with one component for each variable in the saved data set. SPSS variables with value labels are optionally converted to R factors.

SPSS Data Entry is an application for creating data entry forms. By default it creates data files with extra formatting information that read.spss cannot handle, but it is possible to export the data in an ordinary SPSS format.

Some third-party applications claim to produce data ‘in SPSS format’ but with differences in the formats: read.spss may or may not be able to handle these.

Stata .dta files are a binary file format. Files from versions 5 up to 11 of Stata can be read and written by functions read.dta and write.dta. Stata variables with value labels are optionally converted to (and from) R factors. Stata version 12 by default writes ‘format-115 datasets’: read.dta currently may not be able to read those.

read.systat reads those Systat SAVE files that are rectangular data files (mtype = 1) written on little-endian machines (such as from Windows). These have extension .sys or (more recently) .syd.


3.2 Octave

Octave is a numerical linear algebra system (http://www.octave.org), and function read.octave in package foreign can read in files in Octave text data format created using the Octave command save -ascii, with support for most of the common types of variables, including the standard atomic (real and complex scalars, matrices, and N-d arrays, strings, ranges, and boolean scalars and matrices) and recursive (structs, cells, and lists) ones.


4 Relational databases


4.1 Why use a database?

There are limitations on the types of data that R handles well. Since all data being manipulated by R are resident in memory, and several copies of the data can be created during execution of a function, R is not well suited to extremely large data sets. Data objects that are more than a (few) hundred megabytes in size can cause R to run out of memory, particularly on a 32-bit operating system.

R does not easily support concurrent access to data. That is, if more than one user is accessing, and perhaps updating, the same data, the changes made by one user will not be visible to the others.

R does support persistence of data, in that you can save a data object or an entire worksheet from one session and restore it at the subsequent session, but the format of the stored data is specific to R and not easily manipulated by other systems.

Database management systems (DBMSs) and, in particular, relational DBMSs (RDBMSs) are designed to do all of these things well. Their strengths are

  1. To provide fast access to selected parts of large databases.
  2. Powerful ways to summarize and cross-tabulate columns in databases.
  3. Store data in more organized ways than the rectangular grid model of spreadsheets and R data frames.
  4. Concurrent access from multiple clients running on multiple hosts while enforcing security constraints on access to the data.
  5. Ability to act as a server to a wide range of clients.

The sort of statistical applications for which DBMS might be used are to extract a 10% sample of the data, to cross-tabulate data to produce a multi-dimensional contingency table, and to extract data group by group from a database for separate analysis.

Increasingly OSes are themselves making use of DBMSs for these reasons, so it is nowadays likely that one will be already installed on your (non-Windows) OS. Akonadi is used by KDE4 to store personal information. Several OS X applications, including Mail and Address Book, use SQLite.


4.2 Overview of RDBMSs

Traditionally there had been large (and expensive) commercial RDBMSs (Informix; Oracle; Sybase; IBM’s DB2; Microsoft SQL Server on Windows) and academic and small-system databases (such as MySQL5, PostgreSQL, Microsoft Access, …), the former marked out by much greater emphasis on data security features. The line is blurring, with MySQL and PostgreSQL having more and more high-end features, and free ‘express’ versions being made available for the commercial DBMSs.

There are other commonly used data sources, including spreadsheets, non-relational databases and even text files (possibly compressed). Open Database Connectivity (ODBC) is a standard to use all of these data sources. It originated on Windows (see https://msdn.microsoft.com/en-us/library/ms710252%28v=vs.85%29.aspx) but is also implemented on Linux/Unix/OS X.

All of the packages described later in this chapter provide clients to client/server databases. The database can reside on the same machine or (more often) remotely. There is an ISO standard (in fact several: SQL92 is ISO/IEC 9075, also known as ANSI X3.135-1992, and SQL99 is coming into use) for an interface language called SQL (Structured Query Language, sometimes pronounced ‘sequel’: see Bowman et al. 1996 and Kline and Kline 2001) which these DBMSs support to varying degrees.


4.2.1 SQL queries

The more comprehensive R interfaces generate SQL behind the scenes for common operations, but direct use of SQL is needed for complex operations in all. Conventionally SQL is written in upper case, but many users will find it more convenient to use lower case in the R interface functions.

A relational DBMS stores data as a database of tables (or relations) which are rather similar to R data frames, in that they are made up of columns or fields of one type (numeric, character, date, currency, …) and rows or records containing the observations for one entity.

SQL ‘queries’ are quite general operations on a relational database. The classical query is a SELECT statement of the type

SELECT State, Murder FROM USArrests WHERE Rape > 30 ORDER BY Murder

SELECT t.sch, c.meanses, t.sex, t.achieve
  FROM student as t, school as c WHERE t.sch = c.id

SELECT sex, COUNT(*) FROM student GROUP BY sex

SELECT sch, AVG(sestat) FROM student GROUP BY sch LIMIT 10

The first of these selects two columns from the R data frame USArrests that has been copied across to a database table, subsets on a third column and asks the results be sorted. The second performs a database join on two tables student and school and returns four columns. The third and fourth queries do some cross-tabulation and return counts or averages. (The five aggregation functions are COUNT(*) and SUM, MAX, MIN and AVG, each applied to a single column.)

SELECT queries use FROM to select the table, WHERE to specify a condition for inclusion (or more than one condition separated by AND or OR), and ORDER BY to sort the result. Unlike data frames, rows in RDBMS tables are best thought of as unordered, and without an ORDER BY statement the ordering is indeterminate. You can sort (in lexicographical order) on more than one column by separating them by commas. Placing DESC after an ORDER BY puts the sort in descending order.

SELECT DISTINCT queries will only return one copy of each distinct row in the selected table.

The GROUP BY clause selects subgroups of the rows according to the criterion. If more than one column is specified (separated by commas) then multi-way cross-classifications can be summarized by one of the five aggregation functions. A HAVING clause allows the select to include or exclude groups depending on the aggregated value.

If the SELECT statement contains an ORDER BY statement that produces a unique ordering, a LIMIT clause can be added to select (by number) a contiguous block of output rows. This can be useful to retrieve rows a block at a time. (It may not be reliable unless the ordering is unique, as the LIMIT clause can be used to optimize the query.)

There are queries to create a table (CREATE TABLE, but usually one copies a data frame to the database in these interfaces), INSERT or DELETE or UPDATE data. A table is destroyed by a DROP TABLE ‘query’.

Kline and Kline (2001) discuss the details of the implementation of SQL in Microsoft SQL Server 2000, Oracle, MySQL and PostgreSQL.


4.2.2 Data types

Data can be stored in a database in various data types. The range of data types is DBMS-specific, but the SQL standard defines many types, including the following that are widely implemented (often not by the SQL name).

float(p)

Real number, with optional precision. Often called real or double or double precision.

integer

32-bit integer. Often called int.

smallint

16-bit integer

character(n)

fixed-length character string. Often called char.

character varying(n)

variable-length character string. Often called varchar. Almost always has a limit of 255 chars.

boolean

true or false. Sometimes called bool or bit.

date

calendar date

time

time of day

timestamp

date and time

There are variants on time and timestamp, with timezone. Other types widely implemented are text and blob, for large blocks of text and binary data, respectively.

The more comprehensive of the R interface packages hide the type conversion issues from the user.


4.3 R interface packages

There are several packages available on CRAN to help R communicate with DBMSs. They provide different levels of abstraction. Some provide means to copy whole data frames to and from databases. All have functions to select data within the database via SQL queries, and to retrieve the result as a whole as a data frame or in pieces (usually as groups of rows).

All except RODBC are tied to one DBMS, but there has been a proposal for a unified ‘front-end’ package DBI (https://developer.r-project.org/db) in conjunction with a ‘back-end’, the most developed of which is RMySQL. Also on CRAN are the back-ends ROracle, RPostgreSQL and RSQLite (which works with the bundled DBMS SQLite, https://www.sqlite.org), RJDBC (which uses Java and can connect to any DBMS that has a JDBC driver) and RpgSQL (a specialist interface to PostgreSQL built on top of RJDBC).

The BioConductor project has updated RdbiPgSQL (formerly on CRAN ca 2000), a first-generation interface to PostgreSQL.

PL/R (http://www.joeconway.com/plr/) is a project to embed R into PostgreSQL.

Package RMongo provides an R interface to a Java client for ‘MongoDB’ (https://en.wikipedia.org/wiki/MongoDB) databases, which are queried using JavaScript rather than SQL. Package rmongodb is another client using mongodb’s C driver.


4.3.1 Packages using DBI

Package RMySQL on CRAN provides an interface to the MySQL database system (see https://www.mysql.com and Dubois, 2000) or its fork MariaDB (see https://mariadb.org/). The description here applies to versions 0.5-0 and later: earlier versions had a substantially different interface. The current version requires the DBI package, and this description will apply with minor changes to all the other back-ends to DBI.

MySQL exists on Unix/Linux/OS X and Windows: there is a ‘Community Edition’ released under GPL but commercial licenses are also available. MySQL was originally a ‘light and lean’ database. (It preserves the case of names where the operating file system is case-sensitive, so not on Windows.)

The call dbDriver("MySQL") returns a database connection manager object, and then a call to dbConnect opens a database connection which can subsequently be closed by a call to the generic function dbDisconnect. Use dbDriver("Oracle"), dbDriver("PostgreSQL") or dbDriver("SQLite") with those DBMSs and packages ROracle, RPostgreSQL or RSQLite respectively.

SQL queries can be sent by either dbSendQuery or dbGetQuery. dbGetquery sends the query and retrieves the results as a data frame. dbSendQuery sends the query and returns an object of class inheriting from "DBIResult" which can be used to retrieve the results, and subsequently used in a call to dbClearResult to remove the result.

Function fetch is used to retrieve some or all of the rows in the query result, as a list. The function dbHasCompleted indicates if all the rows have been fetched, and dbGetRowCount returns the number of rows in the result.

These are convenient interfaces to read/write/test/delete tables in the database. dbReadTable and dbWriteTable copy to and from an R data frame, mapping the row names of the data frame to the field row_names in the MySQL table.

> library(RMySQL) # will load DBI as well
## open a connection to a MySQL database
> con <- dbConnect(dbDriver("MySQL"), dbname = "test")
## list the tables in the database
> dbListTables(con)
## load a data frame into the database, deleting any existing copy
> data(USArrests)
> dbWriteTable(con, "arrests", USArrests, overwrite = TRUE)
TRUE
> dbListTables(con)
[1] "arrests"
## get the whole table
> dbReadTable(con, "arrests")
               Murder Assault UrbanPop Rape
Alabama          13.2     236       58 21.2
Alaska           10.0     263       48 44.5
Arizona           8.1     294       80 31.0
Arkansas          8.8     190       50 19.5
...
## Select from the loaded table
> dbGetQuery(con, paste("select row_names, Murder from arrests",
                        "where Rape > 30 order by Murder"))
   row_names Murder
1   Colorado    7.9
2    Arizona    8.1
3 California    9.0
4     Alaska   10.0
5 New Mexico   11.4
6   Michigan   12.1
7     Nevada   12.2
8    Florida   15.4
> dbRemoveTable(con, "arrests")
> dbDisconnect(con)

4.3.2 Package RODBC

Package RODBC on CRAN provides an interface to database sources supporting an ODBC interface. This is very widely available, and allows the same R code to access different database systems. RODBC runs on Unix/Linux, Windows and OS X, and almost all database systems provide support for ODBC. We have tested Microsoft SQL Server, Access, MySQL, PostgreSQL, Oracle and IBM DB2 on Windows and MySQL, MariaDB, Oracle, PostgreSQL and SQLite on Linux.

ODBC is a client-server system, and we have happily connected to a DBMS running on a Unix server from a Windows client, and vice versa.

On Windows ODBC support is part of the OS. On Unix/Linux you will need an ODBC Driver Manager such as unixODBC (http://www.unixODBC.org) or iOBDC (http://www.iODBC.org: this is pre-installed in OS X) and an installed driver for your database system.

Windows provides drivers not just for DBMSs but also for Excel (.xls) spreadsheets, DBase (.dbf) files and even text files. (The named applications do not need to be installed. Which file formats are supported depends on the versions of the drivers.) There are versions for Excel and Access 2007/2010 (go to https://www.microsoft.com/en-us/download/default.aspx, and search for ‘Office ODBC’, which will lead to AccessDatabaseEngine.exe), the ‘2007 Office System Driver’ (the latter has a version for 64-bit Windows, and that will also read earlier versions).

On OS X the Actual Technologies (https://www.actualtech.com/product_access.php) drivers provide ODBC interfaces to Access databases (including Access 2007/2010) and to Excel spreadsheets (not including Excel 2007/2010).

Many simultaneous connections are possible. A connection is opened by a call to odbcConnect or odbcDriverConnect (which on the Windows GUI allows a database to be selected via dialog boxes) which returns a handle used for subsequent access to the database. Printing a connection will provide some details of the ODBC connection, and calling odbcGetInfo will give details on the client and server.

A connection is closed by a call to close or odbcClose, and also (with a warning) when not R object refers to it and at the end of an R session.

Details of the tables on a connection can be found using sqlTables.

Function sqlSave copies an R data frame to a table in the database, and sqlFetch copies a table in the database to an R data frame.

An SQL query can be sent to the database by a call to sqlQuery. This returns the result in an R data frame. (sqlCopy sends a query to the database and saves the result as a table in the database.) A finer level of control is attained by first calling odbcQuery and then sqlGetResults to fetch the results. The latter can be used within a loop to retrieve a limited number of rows at a time, as can function sqlFetchMore.

Here is an example using PostgreSQL, for which the ODBC driver maps column and data frame names to lower case. We use a database testdb we created earlier, and had the DSN (data source name) set up in ~/.odbc.ini under unixODBC. Exactly the same code worked using MyODBC to access a MySQL database under Linux or Windows (where MySQL also maps names to lowercase). Under Windows, DSNs are set up in the ODBC applet in the Control Panel (‘Data Sources (ODBC)’ in the ‘Administrative Tools’ section).

> library(RODBC)
## tell it to map names to l/case
> channel <- odbcConnect("testdb", uid="ripley", case="tolower")
## load a data frame into the database
> data(USArrests)
> sqlSave(channel, USArrests, rownames = "state", addPK = TRUE)
> rm(USArrests)
## list the tables in the database
> sqlTables(channel)
  TABLE_QUALIFIER TABLE_OWNER TABLE_NAME TABLE_TYPE REMARKS
1                              usarrests      TABLE        
## list it
> sqlFetch(channel, "USArrests", rownames = "state")
               murder assault urbanpop rape
Alabama          13.2     236       58 21.2
Alaska           10.0     263       48 44.5
    ...
## an SQL query, originally on one line
> sqlQuery(channel, "select state, murder from USArrests
           where rape > 30 order by murder")
       state murder
1 Colorado      7.9
2 Arizona       8.1
3 California    9.0
4 Alaska       10.0
5 New Mexico   11.4
6 Michigan     12.1
7 Nevada       12.2
8 Florida      15.4
## remove the table
> sqlDrop(channel, "USArrests")
## close the connection
> odbcClose(channel)

As a simple example of using ODBC under Windows with a Excel spreadsheet, we can read from a spreadsheet by

> library(RODBC)
> channel <- odbcConnectExcel("bdr.xls")
## list the spreadsheets
> sqlTables(channel)
  TABLE_CAT TABLE_SCHEM        TABLE_NAME   TABLE_TYPE REMARKS
1 C:\\bdr            NA           Sheet1$ SYSTEM TABLE      NA
2 C:\\bdr            NA           Sheet2$ SYSTEM TABLE      NA
3 C:\\bdr            NA           Sheet3$ SYSTEM TABLE      NA
4 C:\\bdr            NA Sheet1$Print_Area        TABLE      NA
## retrieve the contents of sheet 1, by either of
> sh1 <- sqlFetch(channel, "Sheet1")
> sh1 <- sqlQuery(channel, "select * from [Sheet1$]")

Notice that the specification of the table is different from the name returned by sqlTables: sqlFetch is able to map the differences.


5 Binary files

Binary connections (Connections) are now the preferred way to handle binary files.


5.1 Binary data formats

Packages hdf5, h5r, Bioconductor’s rhdf5, RNetCDF, ncdf and ncdf4 on CRAN provide interfaces to NASA’s HDF5 (Hierarchical Data Format, see https://www.hdfgroup.org/HDF5/) and to UCAR’s netCDF data files (network Common Data Form, see http://www.unidata.ucar.edu/software/netcdf/).

Both of these are systems to store scientific data in array-oriented ways, including descriptions, labels, formats, units, …. HDF5 also allows groups of arrays, and the R interface maps lists to HDF5 groups, and can write numeric and character vectors and matrices.

NetCDF’s version 4 format (confusingly, implemented in netCDF 4.1.1 and later, but not in 4.0.1) includes the use of various HDF5 formats. This is handled by package ncdf4 whereas RNetCDF and ncdf handle version 3 files.

The availability of software to support these formats is somewhat limited by platform, especially on Windows.


5.2 dBase files (DBF)

dBase was a DOS program written by Ashton-Tate and later owned by Borland which has a binary flat-file format that became popular, with file extension .dbf. It has been adopted for the ’Xbase’ family of databases, covering dBase, Clipper, FoxPro and their Windows equivalents Visual dBase, Visual Objects and Visual FoxPro (see http://www.e-bachmann.dk/docs/xbase.htm). A dBase file contains a header and then a series of fields and so is most similar to an R data frame. The data itself is stored in text format, and can include character, logical and numeric fields, and other types in later versions (see for example http://www.digitalpreservation.gov/formats/fdd/fdd000325.shtml and http://www.clicketyclick.dk/databases/xbase/format/index.html).

Functions read.dbf and write.dbf provide ways to read and write basic DBF files on all R platforms. For Windows users odbcConnectDbase in package RODBC provides more comprehensive facilities to read DBF files via Microsoft’s dBase ODBC driver (and the Visual FoxPro driver can also be used via odbcDriverConnect).


6 Image files

A particular class of binary files are those representing images, and a not uncommon request is to read such a file into R as a matrix.

There are many formats for image files (most with lots of variants), and it may be necessary to use external conversion software to first convert the image into one of the formats for which a package currently provides an R reader. A versatile example of such software is ImageMagick and its fork GraphicsMagick. These provide command-line programs convert and gm convert to convert images from one format to another: what formats they can input is determined when they are compiled, and the supported formats can be listed by e.g. convert -list format.

Package pixmap has a function read.pnm to read ‘portable anymap’ images in PBM (black/white), PGM (grey) and PPM (RGB colour) formats. These are also known as ‘netpbm’ formats.

Packages bmp, jpeg and png read the formats after which they are named. See also packages biOps and Momocs, and Bioconductor package EBImage.

TIFF is more a meta-format, a wrapper within which a very large variety of image formats can be embedded. Packages rtiff (orphaned) and tiff can read some of the sub-formats (depending on the external libtiff software against which they are compiled). There some facilities for specialized sub-formats, for example in Bioconductor package beadarray.

Raster files are common in the geographical sciences, and package rgdal provides an interface to GDAL which provides some facilities of its own to read raster files and links to many others. Which formats it supports is determined when GDAL is compiled: use gdalDrivers() to see what these are for the build you are using. It can be useful for uncommon formats such as JPEG 2000 (which is a different format from JPEG, and not currently supported in the OS X nor Windows binary versions of rgdal).


7 Connections

Connections are used in R in the sense of Chambers (1998) and Ripley (2001), a set of functions to replace the use of file names by a flexible interface to file-like objects.


7.1 Types of connections

The most familiar type of connection will be a file, and file connections are created by function file. File connections can (if the OS will allow it for the particular file) be opened for reading or writing or appending, in text or binary mode. In fact, files can be opened for both reading and writing, and R keeps a separate file position for reading and writing.

Note that by default a connection is not opened when it is created. The rule is that a function using a connection should open a connection (needed) if the connection is not already open, and close a connection after use if it opened it. In brief, leave the connection in the state you found it in. There are generic functions open and close with methods to explicitly open and close connections.

Files compressed via the algorithm used by gzip can be used as connections created by the function gzfile, whereas files compressed by bzip2 can be used via bzfile.

Unix programmers are used to dealing with special files stdin, stdout and stderr. These exist as terminal connections in R. They may be normal files, but they might also refer to input from and output to a GUI console. (Even with the standard Unix R interface, stdin refers to the lines submitted from readline rather than a file.)

The three terminal connections are always open, and cannot be opened or closed. stdout and stderr are conventionally used for normal output and error messages respectively. They may normally go to the same place, but whereas normal output can be re-directed by a call to sink, error output is sent to stderr unless re-directed by sink, type="message"). Note carefully the language used here: the connections cannot be re-directed, but output can be sent to other connections.

Text connections are another source of input. They allow R character vectors to be read as if the lines were being read from a text file. A text connection is created and opened by a call to textConnection, which copies the current contents of the character vector to an internal buffer at the time of creation.

Text connections can also be used to capture R output to a character vector. textConnection can be asked to create a new character object or append to an existing one, in both cases in the user’s workspace. The connection is opened by the call to textConnection, and at all times the complete lines output to the connection are available in the R object. Closing the connection writes any remaining output to a final element of the character vector.

Pipes are a special form of file that connects to another process, and pipe connections are created by the function pipe. Opening a pipe connection for writing (it makes no sense to append to a pipe) runs an OS command, and connects its standard input to whatever R then writes to that connection. Conversely, opening a pipe connection for input runs an OS command and makes its standard output available for R input from that connection.

URLs of types ‘http://’, ‘ftp://’ and ‘file://’ can be read from using the function url. For convenience, file will also accept these as the file specification and call url. On most platforms ‘https://’ are also accepted.

Sockets can also be used as connections via function socketConnection on platforms which support Berkeley-like sockets (most Unix systems, Linux and Windows). Sockets can be written to or read from, and both client and server sockets can be used.


7.2 Output to connections

We have described functions cat, write, write.table and sink as writing to a file, possibly appending to a file if argument append = TRUE, and this is what they did prior to R version 1.2.0.

The current behaviour is equivalent, but what actually happens is that when the file argument is a character string, a file connection is opened (for writing or appending) and closed again at the end of the function call. If we want to repeatedly write to the same file, it is more efficient to explicitly declare and open the connection, and pass the connection object to each call to an output function. This also makes it possible to write to pipes, which was implemented earlier in a limited way via the syntax file = "|cmd" (which can still be used).

There is a function writeLines to write complete text lines to a connection.

Some simple examples are

zz <- file("ex.data", "w")  # open an output file connection
cat("TITLE extra line", "2 3 5 7", "", "11 13 17", 
    file = zz, sep = "\n")
cat("One more line\n", file = zz)
close(zz)

## convert decimal point to comma in output, using a pipe (Unix)
## both R strings and (probably) the shell need \ doubled
zz <- pipe(paste("sed s/\\\\./,/ >", "outfile"), "w")
cat(format(round(rnorm(100), 4)), sep = "\n", file = zz)
close(zz)
## now look at the output file:
file.show("outfile", delete.file = TRUE)

## capture R output: use examples from help(lm)
zz <- textConnection("ex.lm.out", "w")
sink(zz)
example(lm, prompt.echo = "> ")
sink()
close(zz)
## now `ex.lm.out' contains the output for futher processing.
## Look at it by, e.g.,
cat(ex.lm.out, sep = "\n")

7.3 Input from connections

The basic functions to read from connections are scan and readLines. These take a character string argument and open a file connection for the duration of the function call, but explicitly opening a file connection allows a file to be read sequentially in different formats.

Other functions that call scan can also make use of connections, in particular read.table.

Some simple examples are

## read in file created in last examples
readLines("ex.data")
unlink("ex.data")

## read listing of current directory (Unix)
readLines(pipe("ls -1"))

# remove trailing commas from an input file.
# Suppose we are given a file `data' containing
450, 390, 467, 654,  30, 542, 334, 432, 421,
357, 497, 493, 550, 549, 467, 575, 578, 342,
446, 547, 534, 495, 979, 479
# Then read this by
scan(pipe("sed -e s/,$// data"), sep=",")

For convenience, if the file argument specifies a FTP or HTTP URL, the URL is opened for reading via url. Specifying files via ‘file://foo.bar’ is also allowed.


7.3.1 Pushback

C programmers may be familiar with the ungetc function to push back a character onto a text input stream. R connections have the same idea in a more powerful way, in that an (essentially) arbitrary number of lines of text can be pushed back onto a connection via a call to pushBack.

Pushbacks operate as a stack, so a read request first uses each line from the most recently pushbacked text, then those from earlier pushbacks and finally reads from the connection itself. Once a pushbacked line is read completely, it is cleared. The number of pending lines pushed back can be found via a call to pushBackLength.

A simple example will show the idea.

> zz <- textConnection(LETTERS)
> readLines(zz, 2)
[1] "A" "B"
> scan(zz, "", 4)
Read 4 items
[1] "C" "D" "E" "F"
> pushBack(c("aa", "bb"), zz)
> scan(zz, "", 4)
Read 4 items
[1] "aa" "bb" "G"  "H" 
> close(zz)

Pushback is only available for connections opened for input in text mode.


7.4 Listing and manipulating connections

A summary of all the connections currently opened by the user can be found by showConnections(), and a summary of all connections, including closed and terminal connections, by showConnections(all = TRUE)

The generic function seek can be used to read and (on some connections) reset the current position for reading or writing. Unfortunately it depends on OS facilities which may be unreliable (e.g. with text files under Windows). Function isSeekable reports if seek can change the position on the connection given by its argument.

The function truncate can be used to truncate a file opened for writing at its current position. It works only for file connections, and is not implemented on all platforms.


7.5 Binary connections

Functions readBin and writeBin read to and write from binary connections. A connection is opened in binary mode by appending "b" to the mode specification, that is using mode "rb" for reading, and mode "wb" or "ab" (where appropriate) for writing. The functions have arguments

readBin(con, what, n = 1, size = NA, endian = .Platform$endian) 
writeBin(object, con, size = NA, endian = .Platform$endian) 

In each case con is a connection which will be opened if necessary for the duration of the call, and if a character string is given it is assumed to specify a file name.

It is slightly simpler to describe writing, so we will do that first. object should be an atomic vector object, that is a vector of mode numeric, integer, logical, character, complex or raw, without attributes. By default this is written to the file as a stream of bytes exactly as it is represented in memory.

readBin reads a stream of bytes from the file and interprets them as a vector of mode given by what. This can be either an object of the appropriate mode (e.g. what=integer()) or a character string describing the mode (one of the five given in the previous paragraph or "double" or "int"). Argument n specifies the maximum number of vector elements to read from the connection: if fewer are available a shorter vector will be returned. Argument signed allows 1-byte and 2-byte integers to be read as signed (the default) or unsigned integers.

The remaining two arguments are used to write or read data for interchange with another program or another platform. By default binary data is transferred directly from memory to the connection or vice versa. This will not suffice if the data are to be transferred to a machine with a different architecture, but between almost all R platforms the only change needed is that of byte-order. Common PCs (‘ix86’-based and ‘x86_64’-based machines), Compaq Alpha and Vaxen are little-endian, whereas Sun Sparc, mc680x0 series, IBM R6000, SGI and most others are big-endian. (Network byte-order (as used by XDR, eXternal Data Representation) is big-endian.) To transfer to or from other programs we may need to do more, for example to read 16-bit integers or write single-precision real numbers. This can be done using the size argument, which (usually) allows sizes 1, 2, 4, 8 for integers and logicals, and sizes 4, 8 and perhaps 12 or 16 for reals. Transferring at different sizes can lose precision, and should not be attempted for vectors containing NA’s.

Character strings are read and written in C format, that is as a string of bytes terminated by a zero byte. Functions readChar and writeChar provide greater flexibility.


7.5.1 Special values

Functions readBin and writeBin will pass missing and special values, although this should not be attempted if a size change is involved.

The missing value for R logical and integer types is INT_MIN, the smallest representable int defined in the C header limits.h, normally corresponding to the bit pattern 0x80000000.

The representation of the special values for R numeric and complex types is machine-dependent, and possibly also compiler-dependent. The simplest way to make use of them is to link an external application against the standalone Rmath library which exports double constants NA_REAL, R_PosInf and R_NegInf, and include the header Rmath.h which defines the macros ISNAN and R_FINITE.

If that is not possible, on all current platforms IEC 60559 (aka IEEE 754) arithmetic is used, so standard C facilities can be used to test for or set Inf, -Inf and NaN values. On such platforms NA is represented by the NaN value with low-word 0x7a2 (1954 in decimal).

Character missing values are written as NA, and there are no provision to recognize character values as missing (as this can be done by re-assigning them once read).


8 Network interfaces

Some limited facilities are available to exchange data at a lower level across network connections.


8.1 Reading from sockets

Base R comes with some facilities to communicate via BSD sockets on systems that support them (including the common Linux, Unix and Windows ports of R). One potential problem with using sockets is that these facilities are often blocked for security reasons or to force the use of Web caches, so these functions may be more useful on an intranet than externally. For new projects it is suggested that socket connections are used instead.

The earlier low-level interface is given by functions make.socket, read.socket, write.socket and close.socket.


8.2 Using download.file

Function download.file is provided to read a file from a Web resource via FTP or HTTP and write it to a file. Often this can be avoided, as functions such as read.table and scan can read directly from a URL, either by explicitly using url to open a connection, or implicitly using it by giving a URL as the file argument.


9 Reading Excel spreadsheets

The most common R data import/export question seems to be ‘how do I read an Excel spreadsheet’. This chapter collects together advice and options given earlier. Note that most of the advice is for pre-Excel 2007 spreadsheets and not the later .xlsx format.

The first piece of advice is to avoid doing so if possible! If you have access to Excel, export the data you want from Excel in tab-delimited or comma-separated form, and use read.delim or read.csv to import it into R. (You may need to use read.delim2 or read.csv2 in a locale that uses comma as the decimal point.) Exporting a DIF file and reading it using read.DIF is another possibility.

If you do not have Excel, many other programs are able to read such spreadsheets and export in a text format on both Windows and Unix, for example Gnumeric (http://www.gnome.org/projects/gnumeric/) and OpenOffice (https://www.openoffice.org). You can also cut-and-paste between the display of a spreadsheet in such a program and R: read.table will read from the R console or, under Windows, from the clipboard (via file = "clipboard" or readClipboard). The read.DIF function can also read from the clipboard.

Note that an Excel .xls file is not just a spreadsheet: such files can contain many sheets, and the sheets can contain formulae, macros and so on. Not all readers can read other than the first sheet, and may be confused by other contents of the file.

Windows users (of 32-bit R) can use odbcConnectExcel in package RODBC. This can select rows and columns from any of the sheets in an Excel spreadsheet file (at least from Excel 97–2003, depending on your ODBC drivers: by calling odbcConnect directly versions back to Excel 3.0 can be read). The version odbcConnectExcel2007 will read the Excel 2007 formats as well as earlier ones (provided the drivers are installed, including with 64-bit Windows R: see RODBC). OS X users can also use RODBC if they have a suitable driver (e.g. that from Actual Technologies).

Perl users have contributed a module OLE::SpreadSheet::ParseExcel and a program xls2csv.pl to convert Excel 95–2003 spreadsheets to CSV files. Package gdata provides a basic wrapper in its read.xls function. With suitable Perl modules installed this function can also read Excel 2007 spreadsheets.

32-bit Windows package xlsReadWrite from http://www.swissr.org/ and CRAN has a function read.xls to read .xls files (based on a third-party non-Open-Source Delphi component).

Packages dataframes2xls and WriteXLS each contain a function to write one or more data frames to an .xls file, using Python and Perl respectively. Another version of write.xls in available in package xlsReadWrite.

Two packages which can read and and manipulate Excel 2007/10 spreadsheets but not earlier formats are xlsx (which requires Java) and the Omegahat package RExcelXML.

Package XLConnect can read, write and manipulate both Excel 97–2003 and Excel 2007/10 spreadsheets, requiring Java.


Appendix A References

R. A. Becker, J. M. Chambers and A. R. Wilks (1988) The New S Language. A Programming Environment for Data Analysis and Graphics. Wadsworth & Brooks/Cole.

J. Bowman, S. Emberson and M. Darnovsky (1996) The Practical SQL Handbook. Using Structured Query Language. Addison-Wesley.

J. M. Chambers (1998) Programming with Data. A Guide to the S Language. Springer-Verlag.

P. Dubois (2000) MySQL. New Riders.

M. Henning and S. Vinoski (1999) Advanced CORBA Programming with C++. Addison-Wesley.

K. Kline and D. Kline (2001) SQL in a Nutshell. O’Reilly.

B. Momjian (2000) PostgreSQL: Introduction and Concepts. Addison-Wesley. Also available at http://momjian.us/main/writings/pgsql/aw_pgsql_book/.

B. D. Ripley (2001) Connections. \R News, 1/1, 16–7. \https://www.r-project.org/doc/Rnews/Rnews_2001-1.pdf

T. M. Therneau and P. M. Grambsch (2000) Modeling Survival Data. Extending the Cox Model. Springer-Verlag.

E. J. Yarger, G. Reese and T. King (1999) MySQL & mSQL. O’Reilly.


Function and variable index

Jump to:   .  
B   C   D   F   G   H   I   M   N   O   P   R   S   T   U   W   X  
Index Entry  Section

.
.dbf: RODBC
.xls: RODBC
.xls: RODBC

B
bzfile: Types of connections

C
cat: Export to text files
cat: Output to connections
close: RODBC
close: Types of connections
close.socket: Reading from sockets
count.fields: Variations on read.table

D
data.restore: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
dataframes2xls: Reading Excel spreadsheets
dbClearResult: DBI
dbConnect: DBI
dbDisconnect: DBI
dbDriver: DBI
dbExistsTable: DBI
dbGetQuery: DBI
dbReadTable: DBI
dbRemoveTable: DBI
dbSendQuery: DBI
dbWriteTable: DBI

F
fetch: DBI
file: Types of connections
format: Export to text files
ftable: Flat contingency tables

G
gzfile: Types of connections

H
hdf5: Binary data formats

I
isSeekable: Listing and manipulating connections

M
make.socket: Reading from sockets

N
netCDF: Binary data formats

O
odbcClose: RODBC
odbcConnect: RODBC
odbcConnectDbase: dBase files (DBF)
odbcConnectExcel: RODBC
odbcConnectExcel: Reading Excel spreadsheets
odbcConnectExcel2007: Reading Excel spreadsheets
odbcDriverConnect: RODBC
odbcGetInfo: RODBC
odbcQuery: RODBC
open: Types of connections

P
pipe: Types of connections
pushBack.: Pushback
pushBackLength: Pushback

R
read.csv: Variations on read.table
read.csv: Reading Excel spreadsheets
read.csv2: Variations on read.table
read.dbf: dBase files (DBF)
read.delim: Variations on read.table
read.delim: Reading Excel spreadsheets
read.delim2: Variations on read.table
read.DIF: Data Interchange Format (DIF)
read.DIF: Reading Excel spreadsheets
read.dta: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
read.epiinfo: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
read.fortran: Fixed-width-format files
read.ftable: Flat contingency tables
read.fwf: Fixed-width-format files
read.mtp: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
read.octave: Octave
read.S: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
read.socket: Reading from sockets
read.spss: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
read.systat: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
read.table: Variations on read.table
read.table: Input from connections
read.table: Reading Excel spreadsheets
read.xls: Reading Excel spreadsheets
read.xport: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
readBin: Binary connections
readChar: Binary connections
readClipboard: Reading Excel spreadsheets
readLines: Using scan directly
readLines: Input from connections
reshape: Re-shaping data
RExcelXML: Reading Excel spreadsheets

S
scan: Imports
scan: Using scan directly
scan: Input from connections
seek: Listing and manipulating connections
showConnections: Listing and manipulating connections
sink: Export to text files
sink: Output to connections
socketConnection: Types of connections
sqlCopy: RODBC
sqlFetch: RODBC
sqlFetchMore: RODBC
sqlGetResults: RODBC
sqlQuery: RODBC
sqlSave: RODBC
sqlTables: RODBC
stack: Re-shaping data
stderr: Types of connections
stdin: Types of connections
stdout: Types of connections
Sys.localeconv: Variations on read.table

T
textConnection: Types of connections
truncate: Listing and manipulating connections

U
unstack.: Re-shaping data
url: Types of connections

W
write: Export to text files
write: Output to connections
write.csv: Export to text files
write.csv2: Export to text files
write.dbf: dBase files (DBF)
write.dta: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
write.foreign: Export to text files
write.matrix: Export to text files
write.socket: Reading from sockets
write.table: Export to text files
write.table: Output to connections
writeBin: Binary connections
writeChar: Binary connections
writeLines: Output to connections
WriteXLS: Reading Excel spreadsheets

X
XLConnect: Reading Excel spreadsheets
xlsReadWrite: Reading Excel spreadsheets
xlsx: Reading Excel spreadsheets

Jump to:   .  
B   C   D   F   G   H   I   M   N   O   P   R   S   T   U   W   X  

Concept index

Jump to:   A   B   C   D   E   F   H   I   L   M   N   O   P   Q   R   S   T   U   X  
Index Entry  Section

A
AWK: Introduction

B
Binary files: Binary files
Binary files: Binary connections

C
comma separated values: Export to text files
Compressed files: Types of connections
Connections: Connections
Connections: Types of connections
Connections: Output to connections
Connections: Listing and manipulating connections
CSV files: Export to text files
CSV files: Variations on read.table

D
Data Interchange Format (DIF): Data Interchange Format (DIF)
Dbase: RODBC
dBase: dBase files (DBF)
DBF files: dBase files (DBF)
DBMS: Relational databases

E
Encodings: Encodings
Encodings: Export to text files
EpiData: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
EpiInfo: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
Excel: RODBC
Excel: RODBC
Exporting to a text file: Export to text files

F
File connections: Types of connections
Fixed-width-format files: Fixed-width-format files
Flat contingency tables: Flat contingency tables

H
Hierarchical Data Format: Binary data formats

I
Importing from other statistical systems: Importing from other statistical systems

L
locales: Variations on read.table

M
Minitab: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
Missing values: Export to text files
Missing values: Variations on read.table
MySQL database system: DBI
MySQL database system: RODBC

N
network Common Data Form: Binary data formats

O
Octave: Octave
ODBC: Overview of RDBMSs
ODBC: RODBC
Open Database Connectivity: Overview of RDBMSs
Open Database Connectivity: RODBC

P
perl: Introduction
perl: Fixed-width-format files
Pipe connections: Types of connections
PostgreSQL database system: RODBC
Pushback on a connection: Pushback

Q
Quoting strings: Export to text files
Quoting strings: Variations on read.table

R
Re-shaping data: Re-shaping data
Relational databases: Relational databases

S
S-PLUS: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
SAS: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
Sockets: Types of connections
Sockets: Reading from sockets
Spreadsheet-like data: Spreadsheet-like data
SPSS: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
SPSS Data Entry: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
SQL queries: SQL queries
Stata: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat
Systat: EpiInfo Minitab SAS S-PLUS SPSS Stata Systat

T
Terminal connections: Types of connections
Text connections: Types of connections

U
Unix tools: Introduction
URL connections: Types of connections
URL connections: Input from connections

X
XML: XML

Jump to:   A   B   C   D   E   F   H   I   L   M   N   O   P   Q   R   S   T   U   X  

Footnotes

(1)

Currently not available from that repository but as a source package for download from http://www.omegahat.org/ROpenOffice/.

(2)

the distinction is subtle, https://en.wikipedia.org/wiki/UTF-16/UCS-2, and the use of surrogate pairs is very rare.

(3)

Even then, Windows applications may expect a Byte Order Mark which the implementation of iconv used by R may or may not add depending on the platform.

(4)

This is normally fast as looking at the first entry rules out most of the possibilities.

(5)

and forks, notably MariaDB.